Ways In Which a Fuel Tank Can be Cleaned
Regular washing and drying of fuel tanks is required to prevent them from easy rusting. All fuel tanks need this regardless of whether it is in cars or bikes. Rust is easy to occur when the fuel gets in contact with the material making the tank often although it is made of stainless steel. Cleaning the inside of the tank is quite a challenging task to do. Only a few detergents are able to clean the oil and dirt that has accumulated inside the tank and using a special method of cleaning. Several ways are used to clean the tanks at home.
Look out for a cleaning agent that does not react to the oils or the material making the tank. A number of ways have been given to do this, and the choice a person can make is to find one that is easy to manage and inexpensive to buy the chemicals.
Read all the instructions written on the fuel and chemical tins before use. Some of these cleaning methods do not require a person who is prone to accidents or allergic to strong chemicals. Most of the chemicals used in cleaning the tank may react to the oil present in the tank, and it is good to wear protective clothing like gloves, aprons and eye protection. You should also keep a bucket of water beside you as a protective measure in case of any reactions causing injury. In a case of spillage on the skin, wash it with cold water.
5 Uses For Cleaning
Use of an acid in any cleaning process makes it very dangerous. Just to sample one of the methods, we will use the caustic soda powder and hydrochloric acid and for a good finish we need the phosphoric acid. All these items are cheap to buy and easily found in many stores.
Lessons Learned About Tanks
If there is some remaining fuel in the tank; the first thing should be removing it and keeping it safe for future use. The taps should also be removed and the holes remaining blocked with a metallic thing. Many corks and bottle tops are made of a material that easily reacts to many chemicals, and therefore it is highly advised that one should avoid them.
Use an open ground or a garage floor when cleaning these tanks. Clean water should be filled in a third of the tank and fill the rest with the caustic soda. After putting in the caustic soda, some reaction is visible, and that is ok, then fill the rest of the tank with more water. After several hours of the mixture being in the tank, pour it out. Rinse any remaining residue of the mixture with clean water and then dry the tank. After that is done, you can enjoy using your well-cleaned tank.
